Here is the critical point: Instead, it uses a software counter. Every time you clean the print heads, the counter increases. Canon programmed the printer to hard-lock at a specific number (usually representing 15,000 to 20,000 pages) and display an error.
The version of the Service Tool you are using is incompatible with your specific G2010 motherboard firmware version.
No. A reset only clears the internal counter for the waste ink pads. It has no effect on your print quality, color management, or the physical printing hardware like the print head. If you are experiencing print quality issues (such as streaks or faded colors), you should perform a print head cleaning cycle from the printer's maintenance menu. resetter printer canon g2010
Wait 10 seconds, then press the again to turn the printer back on normally.
Resetting the counter is a software fix. Your physical waste ink pads may still be full or nearly saturated. A reset without cleaning the pads can lead to ink leaking out of the printer, potentially causing irreparable damage or a mess on your work surface. Here is the critical point: Instead, it uses
Performing this task requires disassembling your printer, which can be complex. However, if you are technically inclined, here is a simplified guide:
Locate the section. Next to Absorber , ensure that Main is selected in the dropdown menu. Click the Set button to the right of the Absorber dropdown. The version of the Service Tool you are
Ensure the printer is plugged into the power outlet but completely turned off.
The Ultimate Guide to Resetting Your Canon Pixma G2010 Printer
It is critical to understand that . It only removes the software lock. If the pad is genuinely saturated, ignoring it could eventually cause ink to leak inside the printer, potentially causing permanent damage.