Ch899 Chouchin Radio Controlled Clock Instructions Free New!

Once activated, the clock searches for this signal, decodes the time data, and automatically drives the physical hands to the correct hour, minute, and second. It also automatically adjusts for Daylight Saving Time (DST) changes. Anatomy of the CH899 Movement

The is designed to synchronize with atomic time signals (like WWVB in the US or MSF in the UK) to provide near-perfect accuracy. Quick Setup Guide (Automatic Setting)

: Stop pressing the button for about 6–10 seconds to save your setting and return to normal timekeeping. TLC Electrical Supplies Troubleshooting Force Signal Search : If the time is incorrect, press and hold the

Once the time is set, the clock will hold this position until it successfully receives a radio signal. 3. CH899 Troubleshooting & FAQs The hands are spinning constantly. ch899 chouchin radio controlled clock instructions free

Once the signal is captured, the hands will fast-forward to the exact, correct local time. Manual Time Setting Procedure

Radio signals are stronger at night. Try setting it up in the evening. 4. Resetting the CH899

Remove the batteries for 10 minutes. Clean the metal contact terminals in the battery compartment with a dry cloth. Insert a brand-new alkaline battery and press RESET . 2. The clock is exactly 1 or 2 hours off Once activated, the clock searches for this signal,

| Problem | Likely Cause | Solution | |--------|--------------|----------| | Clock does not set automatically | Weak signal | Move near a window, away from electronics. Force reception at night. | | Hands spin continuously | Batteries low or interference | Replace with new alkaline batteries. | | Clock is 1 hour fast/slow | DST setting incorrect | Check DST switch. If no switch, manually set and allow overnight sync. | | Second hand stops but others move | Low battery | Replace batteries immediately. | | Clock shows wrong time after battery change | Internal reset failed | Remove batteries for 10 minutes, then reinstall. |

Once the hands park themselves at the index position, the clock stops moving and enters signal reception mode. It will remain completely still while searching for the atomic radio tower broadcast. This process can take anywhere from . Do not touch any buttons or move the clock during this window. Step 4: Time Synchronization

| Symbol | Meaning | |--------|---------| | | Actively searching for radio signal. | | Solid tower | Last sync successful (within 24 hours). | | No tower | No sync attempted or manual mode. | | Second hand at “RX” | Receiving mode active. | | Second hand at “BAT” | Low battery – replace immediately. | Quick Setup Guide (Automatic Setting) : Stop pressing

away from TVs, computers, or routers, which can jam the delicate radio signal. Night Owls : Radio signals are strongest between midnight and 5:00 AM

: If you notice the hands spinning randomly or the second hand moving in two-second jumps, it is time to replace the battery. MSF Radio Controlled Wall Clock - TLC Electrical Supplies