Dt-6507 Led Mirror Clock Instructions -

into the rear compartment to save your settings during power outages.

The clock will display either 24H or 12H . Press or DOWN to toggle your preferred time format, then press MODE one final time to finish. How to Set the Date

The clock features two manual brightness levels (Bright and Dim).

combines a sleek, modern mirrored aesthetic with high-utility functionality, including an internal thermometer, adjustable display dimming, and customizable alarm routines. Whether it is placed on a nightstand or an office desk, configuring its single-surface interface can be confusing without the factory manual. dt-6507 led mirror clock instructions

: Connecting the micro-USB cable to a 5V/1A power brick ensures an always-on display mode .

The display will show 12HR or 24HR. Use the UP or DOWN buttons to select your preferred format.

: Briefly press ALARM in normal mode until the "AL" icon appears on the display. into the rear compartment to save your settings

When you first plug in your DT-6507, the screen will flash, indicating it is ready to be set up. How to Set the Time

: In normal time mode, press the UP button to switch between brightness levels (typically L1, L2, and L3) .

Press and hold the button for 3 seconds until the display flashes. How to Set the Date The clock features

Familiarize yourself with the three main buttons usually located on the back or front panel:

: Use UP/DOWN to adjust values, pressing MODE between each step to confirm. ⏰ Alarm Configuration Hold ALARM for 3 seconds. Set Time : Use UP/DOWN to set the alarm hour and minutes.

Installing the DT-6507 LED mirror clock is a straightforward process. Follow these steps: