Some users use third-party "Fix Firmware" to reset toner counters to 100% and allow the use of refilled cartridges without a chip.
the USB cable connecting the printer to your computer.
This only resets the printer’s perception of toner level, not the actual physical chip on the cartridge. If you have a replaced or refilled cartridge, this method works temporarily. For a permanent solution, you may need to replace the cartridge chip or use a chip-resetter device. how to reset samsung ml-2165 printer
The Samsung ML-2165 is a compact laser printer that typically uses simple physical button combinations for resets, as it lacks a complex LCD menu. Depending on whether you want to clear a simple error or perform a deeper factory/firmware reset, you can use the following methods:
A frequent reason users look to reset the ML-2165 is the stubborn "Replace Toner" or "Toner Exhausted" red light. Samsung uses a small electronic chip on the ML-2165 toner cartridge (MLT-D101S) to count printed pages. When the count hits its limit, the printer stops printing, even if there is still physical ink/powder left in the hopper. Option A: Cover the Chip (Temporary Fix) Some users use third-party "Fix Firmware" to reset
Locate the (Wi-Fi Protected Setup) on the top or front of the printer. Press and hold the WPS button for about 10–15 seconds. The LED light should blink rapidly and then turn off. Release the button.
: Press and hold the Power or Cancel/Stop button for 30 seconds while the unit is unplugged. If you have a replaced or refilled cartridge,
Resetting a Samsung ML-2165 Go to product viewer dialog for this item.
Open the main access door and check for small scraps of ripped paper jamming the internal rollers or feeding mechanisms.