Ge Timer Switch 532641l3 Instruction Manual Pdf Pdf Install [OFFICIAL]

Overrides the program to keep the connected fixture permanently unpowered. AUTO: Runs your saved programmatic ON/OFF schedules.

: Always turn off the power at the circuit breaker or fuse box before starting the installation to avoid electric shock.

Press and MIN to set the exact time you want the lights to turn off. Exiting and Activating

This timer switch is designed exclusively for indoor installations. Do not use it in damp or outdoor locations. Tool Checklist Ensure you have the following tools ready before starting: Flathead and Phillips head screwdrivers Wire strippers Non-contact voltage tester Electrical tape Wire nuts (usually included in the package) Wiring and Installation Guide ge timer switch 532641l3 instruction manual pdf pdf install

Tip: Secure each wire nut tightly and wrap them with a bit of electrical tape for added security. Ensure no bare wire (except the ground) is exposed. Step 5: Mount the Switch

Before initiating the physical setup, confirm that your electrical load aligns with the hardware constraints of the GE 5326-41L3 switch housing. 120VAC, 60Hz.

Pressing the main door or the large On/Off button overrides the current program without deleting your settings. Overrides the program to keep the connected fixture

To access the GE Timer Switch 532641L3 instruction manual PDF, you can visit the General Electric (GE) website or search for the manual online. Once you've located the manual, download it to your device for easy reference during installation.

This device is rated for indoor installation only.

This comprehensive guide serves three purposes: Press and MIN to set the exact time

Open the protective door on the front of the timer to access the programming buttons. System Reset

| Parameter | Rating | |-----------|--------| | Voltage | 120–277 VAC, 60 Hz | | Resistive load | 40 A (240 VAC) | | Tungsten / Ballast | 10 A @ 120 VAC | | Motor (HP) | 2 HP @ 120/240 VAC | | Timer mechanism | Synchronous motor (24-hour dial) | | Minimum ON/OFF time | 30 minutes (using two trippers) |