Pass 4300 User Manual | Magic

While the Magic Pass 4300 is a low-voltage device, standard electrical safety practices should always be followed. According to best practices for similar hardware:

: 80,000 logs (standalone memory storage)

For direct local network integration, plug an Ethernet cable into the port. magic pass 4300 user manual

: Clean the glass prism surface carefully using a static-free, dry microfiber cloth. If issues persist, raise the identification security threshold inside the advanced options menu, or re-enroll a secondary index finger. Issue 2: Network Connection Drops via TCP/IP Cause : Conflicting IP addresses or loose network cabling.

The system will register the ID number associated with the card. 5. Operating the Magic Pass 4300 While the Magic Pass 4300 is a low-voltage

The Magic Pass 4300 is a reliable and secure access control system designed to provide convenient entry to your facility. By following this user manual, you will be able to install, configure, and operate your system with ease. If you have any questions or concerns, please do not hesitate to contact our support team.

When mounting and powering the device, use the following procedures to avoid communication drops or component faults. 1. Power and Locking System Layout this hardware offers a dual-function system.

The Magic Pass 4300 is built to handle high-traffic environments while maintaining a sleek profile. homtech.com.sg Specification User Capacity 1,800 Fingerprint Templates Transaction Buffer 80,000 logs (some models vary) Authentication Fingerprint (1:1, 1:N), ID + Password Identification Speed 1–1.4 seconds Communication TCP/IP, RS232, RS485, Wiegand, Modem (Optional) Power Supply 12V, 400mA Advanced System Features According to the Magic Pass 4300 Data Sheet

To secure the system from tampering, change the role of at least one user from "Normal User" to "Super Admin". Once saved, the device menu can only be unlocked by scanning that administrator's fingerprint. 5. Maintenance, Log Export, and Troubleshooting

is a highly efficient biometric fingerprint access control and time attendance terminal. Designed by HIT as part of the Magic Series, this hardware offers a dual-function system. It tracks employee hours while simultaneously securing physical entry points.