Wittmann Tempro Plus D 360 Manual Exclusive [extra Quality] Jun 2026

Internal air-venting valve is stuck open, venting system pressure.

Cooling water supply pressure is insufficient, or the temperature of the utility water is too high.

Traditional pump seals wear out quickly under high heat and pressure. The Tempro Plus D 360 utilizes a magnetic drive to isolate the motor from the process fluid, ensuring zero leakage.

Open the main water supply to allow the unit's automatic filling valve to engage.

Are you trying to set up a (alternating temperature) process? wittmann tempro plus d 360 manual exclusive

Wittmann TEMPRO plus D 360 (a pressurized water temperature controller capable of operating up to 360°F / 180°C

Equipped with a magnetically coupled pump option to prevent mechanical seal leaks under high-pressure conditions.

The "Plus D" designation signifies the inclusion of Wittmann’s advanced microprocessor control architecture:

Wittmann Tempro Plus D 360 Manual Exclusive: A Guide to Advanced Temperature Control The Wittmann Tempro Plus D 360 Internal air-venting valve is stuck open, venting system

Isolate power and check the heater relays. Verify that cooling water is flowing freely through the return line.

Heater elements are modulated via SSRs rather than mechanical contactors, guaranteeing long service life and micro-precise temperature tracking. Interface & Connectivity

After extensive testing, Fischer Elektronik chose the WITTMANN TEMPRO plus D series. Michael Reichel, Head of Injection Molding, cited the high precision of temperature control and the sophisticated process parameter monitoring as decisive factors. He noted, "We need immediate alarms for the smallest deviation from the set values... We process high-performance engineering plastics and even minute deviations from the norm constitute reject criteria." This real-world endorsement underscores the D series' ability to deliver the consistent, high-quality results required in demanding production environments.

Lower the setpoint temperature on the controller to below . The Tempro Plus D 360 utilizes a magnetic

Motor running on two phases; Mechanical blockage inside the pump housing.

The incoming cooling water must be treated to prevent scaling. Scale buildup on the heat exchanger rapidly degrades cooling efficiency.

Verify the operation of the cooling water inlet filters and clean them if debris is present. Bi-Annual Checklist Test the functionality of the safety temperature limiters.