Carefully pry open the plastic outer casing of the flash drive to expose the physical printed circuit board (PCB).
The tool will flash the firmware and fix the VID 1E3D PID 198A identification issues. 5. Top Reasons for Failure
Once in the settings:
💡 VID 1E3D PID 198A identifies a Chipsbank USB controller. To fix it, you usually need manufacturer-specific "MPTool" software rather than standard Windows drivers. If you'd like, I can help you: Find the exact version of the recovery tool you need.
This is a USB 2.0 Mass Storage Device (Flash Disk, USB Drive). usb device id vid 1e3d pid 198a top
If Windows displays a yellow exclamation mark, try right-clicking the device in Device Manager and choosing "Update Driver" -> "Browse my computer for drivers" -> "Let me pick from a list of available drivers on my computer" -> select "USB Mass Storage Device."
Open the tool. It should automatically detect your drive. You'll likely need to enter a ; the default for Chipsbank tools is almost always 320 or 123456 . Carefully pry open the plastic outer casing of
. These identifiers are most commonly associated with low-cost or "no-name" USB flash drives, often using the Chipsbank CBM2199 series controller. DeviceHunt Technical Breakdown Vendor ID (VID): 1E3D (Chipsbank Microelectronics Co., Ltd.). Product ID (PID): 198A (Flash Disk / Mass Storage Device). Common Controller: CBM2199E or CBM2199S. Device Type: USB 2.0 High Speed Mass Storage. DeviceHunt Why You Might See This ID This specific ID frequently appears in two scenarios: Generic "No-Name" Drives:
The device with these IDs is widely reported in hardware databases and Linux kernel logs as a . Top Reasons for Failure Once in the settings: