Autodata 3.45 The Hardware Information Does Not Match With Your Dongle |work| ⚡ Trusted Source

The emulator often requires elevated permissions to access the virtual dongle drivers. Right-click the on your desktop. Select Properties . Go to the Compatibility tab. Check the box "Run this program as an administrator" . Click Apply and OK . 2. Re-install/Update the Emulator Driver (Sentinel)

Navigate to your installation folder and run the GetUid tool (usually GetUid-x86 or GetUid-x64 ) as an Administrator.

If you rely on Autodata 3.45 for your daily workflow, the most stable way to run it is within a . By setting up the software inside a VM and never changing the VM's hardware settings, you create a "frozen" environment where the hardware information will always match the dongle, regardless of what you do to your actual physical computer. The emulator often requires elevated permissions to access

Check the box next to and select Windows 7 or Windows XP (Service Pack 3) from the dropdown.

At its core, this is a security conflict. Autodata 3.45 uses a licensing system (often involving a physical or virtual "dongle") to ensure the software is only running on authorized hardware. The error occurs when the software detects a change in the environment it was originally "bound" to. Common culprits include: Go to the Compatibility tab

Check and click Apply. 2. Re-register the Licensing Components (The "Reg" Files)

: This UID is used to create a specific license registry file that binds the software instance to that unique piece of hardware. without closing the software

Some technicians use a "Crack Date" tool to keep the software locked to a specific year (like 2014) to maintain compatibility. Avoiding the Issue in the Future

: Changing a hard drive, network adapter, or updating the motherboard BIOS changes the system's fingerprint.

Open Windows File Explorer and navigate to your main drive root (typically C:\ ).

Before making any major hardware upgrade on your shop PC, always launch Autodata 3.45 with the dongle inserted. Then, without closing the software, perform the hardware change. Sometimes the software stays bound dynamically until reboot. This tiny trick has saved many technicians from this exact error.