: Refined disclosure percentages to meet international proprietary right standards.
Required if mist or spray is generated during mixing.
Offers broad-spectrum fungicidal protection.
This article provides a deep dive into the , explaining what has changed, why it changed, and how to implement compliant handling procedures in your plant.
A: No. The update is purely documentary. Thor Group continues to manufacture Acticide MKW2. No reformulation is required.
If you need a custom for handling this biocide
Acticide® MKW 2 is a high-performance, industrial-grade biocide engineered by Thor GmbH to provide comprehensive protection against fungal and algal growth. As a specialized preservative, it is heavily used in aqueous-based exterior compositions, offering exceptional wet-state stability and long-lasting protection against environmental degradation caused by heat, UV light, and moisture leaching.
Acticide MKW2 is a broad-spectrum industrial biocide manufactured by . According to its EPA Master Label, its formula consists of three key active ingredients that work together to prevent microbial growth:
It prevents green algae from gaining a foothold, even in high-humidity areas. The Fungicide:
: Nitrile or butyl rubber gloves with a breakthrough time exceeding 480 minutes.
: Remove contaminated clothing and wash skin immediately with plenty of soap and water.
This guide is for informational purposes only. Always refer to the official SDS provided by the manufacturer or supplier for the specific product batch and jurisdiction. Regulations vary by country; consult a qualified safety professional for site-specific advice.
Because SDS documents are specific to regions (e.g., EU vs. US) and languages, it is vital to get the document directly from the source:
| Ingredient | CAS Number | Updated Wt. % Range | Change | | :--- | :--- | :--- | :--- | | CMIT/MIT (3:1 ratio) | 55965-84-9 | 1.5 – 2.5% | No change | | BIT | 2634-33-5 | 0.5 – 1.5% | | | Water | 7732-18-5 | Balance | No change |
In the world of industrial chemical preservation, documentation is as critical as formulation. Acticide MKW2, a broad-spectrum, VOC-free biocide manufactured by Thor Group, has long been the gold standard for protecting water-based products—paints, polymers, adhesives, and slurries—from bacterial and fungal degradation.
Proper storage ensures chemical stability and prevents catastrophic environmental run-off. Storage Protocols
: Refined disclosure percentages to meet international proprietary right standards.
Required if mist or spray is generated during mixing.
Offers broad-spectrum fungicidal protection.
This article provides a deep dive into the , explaining what has changed, why it changed, and how to implement compliant handling procedures in your plant.
A: No. The update is purely documentary. Thor Group continues to manufacture Acticide MKW2. No reformulation is required. acticide mkw2 sds updated
If you need a custom for handling this biocide
Acticide® MKW 2 is a high-performance, industrial-grade biocide engineered by Thor GmbH to provide comprehensive protection against fungal and algal growth. As a specialized preservative, it is heavily used in aqueous-based exterior compositions, offering exceptional wet-state stability and long-lasting protection against environmental degradation caused by heat, UV light, and moisture leaching.
Acticide MKW2 is a broad-spectrum industrial biocide manufactured by . According to its EPA Master Label, its formula consists of three key active ingredients that work together to prevent microbial growth:
It prevents green algae from gaining a foothold, even in high-humidity areas. The Fungicide: This article provides a deep dive into the
: Nitrile or butyl rubber gloves with a breakthrough time exceeding 480 minutes.
: Remove contaminated clothing and wash skin immediately with plenty of soap and water.
This guide is for informational purposes only. Always refer to the official SDS provided by the manufacturer or supplier for the specific product batch and jurisdiction. Regulations vary by country; consult a qualified safety professional for site-specific advice.
Because SDS documents are specific to regions (e.g., EU vs. US) and languages, it is vital to get the document directly from the source: Thor Group continues to manufacture Acticide MKW2
| Ingredient | CAS Number | Updated Wt. % Range | Change | | :--- | :--- | :--- | :--- | | CMIT/MIT (3:1 ratio) | 55965-84-9 | 1.5 – 2.5% | No change | | BIT | 2634-33-5 | 0.5 – 1.5% | | | Water | 7732-18-5 | Balance | No change |
In the world of industrial chemical preservation, documentation is as critical as formulation. Acticide MKW2, a broad-spectrum, VOC-free biocide manufactured by Thor Group, has long been the gold standard for protecting water-based products—paints, polymers, adhesives, and slurries—from bacterial and fungal degradation.
Proper storage ensures chemical stability and prevents catastrophic environmental run-off. Storage Protocols