Stc-600 Temperature Controller Manual Pdf

±1°C (-40°C to +50°C); ±2°C for other ranges Relay Contact Capacity: Cooling/Compressor: 8A / 220VAC Defrost: 8A / 220VAC Alarm: 8A / 220VAC Sensor Type: NTC Sensor (2-meter cable length included) Shell Material: Gray, ABS flame-retardant plastic Front Panel Waterproof Rating: IP65 2. Installation and Dimensions

220VAC ± 10%, 50/60Hz (Optional 110VAC or 12VDC variants)

The STC-600 temperature controller comes with several advanced features, including: Stc-600 Temperature Controller Manual Pdf

Are you using the , or just the cooling mode?

Evaporator/defrost temperature sensor (NTC). Control Panel and Key Operations ±1°C (-40°C to +50°C); ±2°C for other ranges

Compressor startup delay is active (protects against short-cycling). Defrost LED (Steady): Defrost system is actively heating.

: Press the "Power" button or wait for 30 seconds of inactivity to save changes and return to the main temperature display. Key Menu Functions Control Panel and Key Operations Compressor startup delay

By understanding its features and utilizing the manual for specific parameters, you can effectively install and operate the Elitech STC-600. Keep the PDF handy as a reference for wiring diagrams, parameter lists, and safety instructions.

The controller relies on both the Target Value ( F1 ) and the Hysteresis value ( F2 ) to manage loads.

: Used to save values, enter core programming pathways, or switch views.

Press and hold for 3 seconds until F1 shows on the display.