Never use Wi-Fi for DVS audio traffic. A verified setup utilizes a hardwired Ethernet connection. If using modern laptops without an RJ45 port, verify your USB-C or Thunderbolt to Ethernet adapter uses a high-performance chipset (like Intel or Realtek) officially supported by Audinate. Clocking and Latency: The Core of Verification
While DVS itself does include a software mixer or internal patching UI, it works with Dante Controller to route audio:
Close your DAW, start DVS, and run the LatencyMon analysis for at least 10 to 15 minutes while streaming test audio.
Integrating software-based audio setups with hardware networks requires absolute reliability. Audinate’s Dante Virtual Soundcard (DVS) turns your computer into a Dante-powered workstation, turning your Ethernet port into a 64x64 channel audio interface. dante virtual soundcard dvs verified
Double-check your network switch configurations. This behavior is almost always caused by Green Ethernet (EEE) power-saving modes shutting down the network port during brief pauses in audio traffic. Conclusion
DVS operates by becoming a software-based sound card. When installed, it appears as a standard audio device within the operating system. The software captures the audio from any application on the computer, encapsulates it into Dante packets, and transmits it over a standard Gigabit Ethernet network. Simultaneously, it can receive Dante audio streams from the network and play them back through the computer's speakers or send them to other applications.
Best for routing non-Dante software (Spotify, Zoom) into a Dante network. Troubleshooting Verified Status Never use Wi-Fi for DVS audio traffic
Highly stable for legacy Intel Mac setups.
For users exploring their options, several alternatives exist. is a popular free option for Windows, offering complex internal audio routing. JACK Audio Connection Kit is a powerful, open-source alternative for low-latency audio routing on Linux, Windows, and macOS. For dedicated Dante hardware, the RME Digiface Dante is a professional USB 3.0 interface providing extremely stable, low-latency performance with added physical I/O.
DVS sends audio as UDP network packets. A standard unmanaged home switch will fail under heavy audio loads. Your network switches must be configured correctly to maintain a verified status. Requirement Managed Gigabit Switch Clocking and Latency: The Core of Verification While
However, achieving glitch-free, low-latency performance requires a system that is "DVS Verified."
While powerful, DVS has specific operational rules. Notably, it cannot run simultaneously with Audinate’s other software bridge,
Recommended for older hardware, high-traffic networks, or maximum safety margins during long archival recordings.
Set your computer network interface to DHCP (automatic) or ensure a static IP is within the same subnet as your Dante devices. Why Use Verified DVS vs. Dante Via?