Gateman V20 Manual -

: If you hear a melody (e.g., "To Elise") when operating the lock, the batteries are low.

When the batteries run low, the lock will play a distinct melody (similar to "To Elise") after unlocking, and a battery icon will flash on the keypad. Replace all immediately. Do not mix old and new batteries. Emergency 9V Jump-Start

Locate the two metallic contact points at the very bottom edge of the external front body.

9V battery jump-start feature is a lifesaver. gateman v20 manual

Touch the RFID card or key tag to the "Card" reader icon on the outdoor unit. You can register multiple keys consecutively. Press the button to save. Unlocking from Outside :

Hidden key slot for emergency physical access. Internal Assembly (Main Body) Battery Compartment: Holds 4 AA alkaline batteries.

The lock automatically throws the deadbolt 2-5 seconds after the door closes. : If you hear a melody (e

On the outdoor keypad, enter your desired .

Use the installation template provided in the original box. Place it on the inside of your door at your desired height (usually 1 meter from the floor). Mark the center hole for the connecting cable. Step 2: Drill the Main Hole

Plug the cable harness from the external unit into the receiving port on the back of the internal main body. Ensure the connector clicks securely into place. Do not mix old and new batteries

If an incorrect PIN is entered 5 consecutive times, the lock will enter a 3-minute lockdown mode (tamper mode). During this time, the keypad will not respond. Wait 3 minutes, then try again. 5.3 Resetting the Unit

Open the battery cover and press the button. Enter your PIN code followed by [#] .

Before diving into configuration, it is helpful to understand the basic physical and technical attributes of your Gateman V20 system: Specification 4 to 12-digit PIN Code, Proximity RFID Card/Key Tag User Capacity