Alpha V1 Jet-em Manual -

: Run high-pressure, heat-resistant piping or an approved flexible hose from the heater outlet directly to your home’s hot water distribution line.

Connect a clean, dry, oil-free air supply to the .

| Feature | Alpha V1-JET-E | Alpha V1-JET-EP | | :--- | :--- | :--- | | | Instantaneous Water Heater | Instantaneous Water Heater | | Key Feature | Standard model, basic safety features | Pump model with a built-in booster pump | | Power | 4.5 kW | 4500W / 2500W | | Minimum Pressure | 13.8 kPa (2 psi) | 20 kPa (0.2 bar) | | Safety | ELCB, Auto Thermal Cut-out (55°C) | ELCB, Auto Thermal Cut-out (55°C), Silver Ion Antibacterial (Ag+) | | Dimensions (WxLxH) | 250 x 368 x 112 mm | 365 x 250 x 112 mm |

and an optional lightning protector to prevent electrical surges from reaching the user. Temperature Control

| Feature | Alpha V1 Jet-EM | Typical Turbofan Manual | | :--- | :--- | :--- | | | EM field exposure / coil quench | Fire / blade burst | | Control Variable | Magnetic flux density (Tesla) | Fuel flow (PPH) | | Emergency Shutdown | Dump capacitor bank into resistor grid | Cut fuel, deploy fire bottles | | Calibration Tool | Flux probe & gaussmeter | Borescope & pressure transducer | | MTBF (Manual stated) | 1,200 hours (coil-limited) | 10,000 hours (HPT blade-limited) | alpha v1 jet-em manual

Faster close times impart more kinetic energy, which is ideal for breaking the surface tension of sticky polymer strings. 3. Backpressure

Detailed service and training manuals for various versions (like the

: Switch off the main electrical breaker before opening the unit cover.

If the DPI deviates by more than 15% from your target setting, pause the cycle immediately to check for line blockages. Safe Shutdown Protocol : Run high-pressure, heat-resistant piping or an approved

: If your model features a "stop" or push button, use it to pause water flow without turning off the valve. Alpha Home Appliances Sdn Bhd 3. Safety & Maintenance ELCB Testing : It is recommended to test the ELCB monthly. Press the button; the reset lever should pop down. Push it back up to the power. Indicator Lights : Indicates the unit is shutting down or has a fault. Blinking Red

The Alpha V1 features an adjustable needle stroke that dictates the volume of fluid displaced per pulse. Locate the micrometer dial on top of the Jetting Head.

Power on the control module. The primary LCD dashboard displays real-time pressure (P1), temperature (T1), and flow rate (F1).

The Alpha V1-JET-E and V1-JET-EP are reliable and safe instant water heaters when installed and operated correctly. If you cannot find your physical manual, the official manufacturer (PT. Alpha Indonesia) is your best resource. Temperature Control | Feature | Alpha V1 Jet-EM

The Alpha V1 Jet-Em manual utilizes a specific digital shorthand for system errors. Here are the most common:

: An overheating protection system that automatically shuts off the heating element if the water temperature exceeds 55°C, preventing scalding injuries and damage to the unit.

Shut down the cycle, execute the System Priming Procedure to bleed out trapped air, and inspect the fluid filter for restrictions. Symptom: Thermal Overheat Fault (Error Code: E-208)

The unit is designed for both high and low water pressure scenarios (Minimum working pressure: 0.02 MPa; Maximum: 0.8 MPa).

High-power heating element suitable for fast heating.