Hpe Smart Array S100i Sr Gen10 Sw Raid Driver For Windows Server 2022 Updated

When you reach the screen asking "Where do you want to install Windows?", your drives will likely not appear.

Click , point to the subfolder on your USB flash drive containing the extracted files, and click OK.

The installer will scan and display the . Click Next .

Relies on the host server CPU cycles to process RAID parity calculations instead of dedicated on-card hardware. When you reach the screen asking "Where do

Power on the server and press during POST to initiate the UEFI System Utilities .

The S100i controller . SAS drives require a physical Smart Array controller (P-series). How do I check if the driver is loaded?

Before the driver can be used effectively, the RAID array must be configured. Click Next

: 1010.14.0.0(C) (released Sept 28, 2022) is the primary recommended version for Windows Server 2022.

Reboot the server and press during POST to enter HPE Intelligent Provisioning .

The Intelligent Provisioning system automatically mounts a virtual deployment drive containing all required hardware drivers, including the S100i storage stack, and hands control over to the Windows installer seamlessly. Installing Management Utility Suites The S100i controller

: Supports up to 14 SATA drives simultaneously. RAID Arrays : Configurable to RAID 0, 1, 5, and 10 patterns.

It supports SATA hard drives and SSDs, providing a cost-effective solution for basic RAID requirements (RAID 0, 1, 5, 10).

from HPE Support Center — search for your server model and filter by “Driver – Storage Controller”.