Enroll Now
The offline machine will have a greyed-out icon. Right-click (or long-press) the device and select (or Wake Up ).
Wake-on-LAN (WoL) , you must configure the hardware, operating system, and the AnyDesk application itself. This feature allows you to remotely power on a computer from a sleep or low-power state. 1. Enable Hardware Support (BIOS/UEFI)
: Open AnyDesk on the machine you want to wake. Go to Settings → Wake-on-LAN and select Enabled .
A file transfer prompt appeared on Elias's screen. The Beast wishes to send: System_Core_Backup.img (800GB). wake on lan anydesk hot
You need a second device (router, VPN, Raspberry Pi, or another PC) on the same LAN as the sleeping computer.
: He restarted his PC and tapped Del to enter the BIOS. Under Power Management , he enabled Wake-On-LAN (sometimes called "Resume by PCI-E").
(Right-click on Start > Device Manager). The offline machine will have a greyed-out icon
Alex sat in a coffee shop three miles from his home office, ready to finalize a massive design presentation. He opened his laptop, launched AnyDesk, and saw the dreaded status: . He had put his high-performance desktop to sleep to save energy, forgetting he hadn't yet configured it to wake up remotely. The Solution: Setting the "Magic" Trap
You open AnyDesk on your home computer, send a "Wake" signal, and the office computer boots up, allowing you to connect instantly. Key Benefits of Using AnyDesk for WoL
AnyDesk requires at least one other device (PC, server, or smartphone) to be online in the same local network as the sleeping computer to act as a bridge and send the wake signal. This feature allows you to remotely power on
: Go to Control Panel → Power Options → Choose what the power buttons do . Click "Change settings that are currently unavailable" and uncheck Turn on fast startup . (Fast startup can sometimes prevent WoL from working after a full shutdown). 3. AnyDesk Configuration
Under the tab, check both "Allow this device to wake the computer" and "Only allow a magic packet to wake the computer". 3. Disable Windows Fast Startup
Now that the hardware is ready, we need to configure Windows to allow the network adapter to respond to Magic Packets.
Check and Only allow a magic packet to wake the computer . Configure AnyDesk Settings: Open AnyDesk on the computer you want to wake. Go to Settings > Wake-on-LAN . Ensure the feature is enabled.
The steps can vary depending on your OS. Here’s a general approach for Windows:
