: To disable the buzzer for quiet areas, press and hold the bottom button for 2 seconds (common on standard RT-100 models).
Measured in μT or mG. It reacts to high-current devices like microwaves, transformers, and refrigerators. Step 4: Understanding the Alarms
(hold for approximately 2–3 seconds) the Power button to turn off the detector. Alternatively, the device will automatically shut down after 5 minutes of inactivity. erickhill rt-100 user manual
According to the manufacturer’s technical notes, the device has a specific "sensing area" on the front. You should use this area to slowly approach the electromagnetic radiation source you wish to measure. The sampling time is about 0.4 seconds, providing near-instant feedback.
The environment exceeds the safety threshold, or the meter is held too close to an active electronics source. Move away from appliances to see if it stops. If it continues in empty space, restart the device. Does the RT-100 measure 5G Wi-Fi or Cell Tower signals? : To disable the buzzer for quiet areas,
The screen will turn and sound an alarm (if enabled) when readings exceed these levels: Electric Field: 40\textV/m" style="display: inline"> Magnetic Field: 0.4\mu T" style="display: inline"> ( ) Manuals & Downloads - erickhill
| Terminal | Label | Function | |----------|-------|-----------| | 1 | L (IN) | Live input (100–240V AC) | | 2 | N (IN) | Neutral input | | 3 | NO | Normally open relay output (to load) | | 4 | COM | Common relay output | | 5 | N (OUT) | Neutral output (to load) | | 6 | S1 / S2 | External temperature sensor (optional) | Step 4: Understanding the Alarms (hold for approximately
If the electric field reading exceeds 40 V/m or the magnetic field exceeds 0.4 μ T (4 mG), the screen turns red, and the buzzer sounds.
Charge fully when the battery icon shows empty to maintain sensor accuracy.