Introduction

This tutorial is a sequel of of Matteo Lissandrini's "Installing HDFS and Hadoop 2.X on a Multi-node cluster with Ubuntu 14.0.

That guide can also be used to install Hadoop 1.x (with minor if none modification); in this work we will assume that you have followed that tutorial and have installed Hadoop 1.x and HDFS.

Even thought HBase 0.94.x can run against both Hadoop 1.x and 2.x versions (see HBase 0.94 book) we highly recommend to use Hadoop 1.x for HBase 0.x and Hadoop 2.x for HBase 1.x and 2.x.

We wish also to inform you that also this tutorial can be applied to HBase 1.x and 2.x (with minor if none modification).

Installing

The following steps will be needed only once. Download HBase 0.94.X stable, to do so navigate in the List of Mirrors select one and decide which version to download. For the sake of simplicity from now on we will assume tho have chosen version 0.94.27.
For example wget can be used:

# from eu
wget https://www.eu.apache.org/dist/hbase/hbase-0.94.27/hbase-0.94.27.tar.gz
# from us
wget https://www.us.apache.org/dist/hbase/hbase-0.94.27/hbase-0.94.27.tar.gz

Then extract the tar to the final installation directory, fix also permission and create a version agnostic symlink.
In this tutorial we will use the standard /usr/local/ as installation directory but obviously you are free to chose the one you prefer.

# extract & copy
sudo tar -zxf hbase-0.94.27.tar.gz -C /usr/local/
# fix permission
sudo chown -R hduser:hadoop /usr/local/hbase-hbase-0.94.27/
# create symlink
sudo ln -s /usr/local/hbase-0.94.27/ /usr/local/hbase

Huawei Router Hg8145v5 Firmware Update Top Work – Safe & Fresh

: Standard firmware updates will not reset your Wi-Fi name, password, or broadband account settings.

If an update goes wrong, the "Reset" button (requiring a needle-type object for 10+ seconds) is your only hope to return to factory defaults. How to Proceed Safely

The HG8145V5 supports 802.11ac (Wi-Fi 5). Newer firmware versions optimize how the router handles interference from neighboring Wi-Fi 6 (AX) and Wi-Fi 7 (BE) routers. Users report a 20-30% reduction in latency spikes after a "top" update. huawei router hg8145v5 firmware update top

Have a unique issue? Check the logs ( Maintenance > System Log ) and search for error code 4352 (firmware mismatch) or 768 (TLS handshake fail) – these are common top fixes.

. Accessing these downloads may require a verified enterprise account. : Because ONTs like the : Standard firmware updates will not reset your

A is not a luxury; it is a necessity for modern internet security and speed. By following this guide—obtaining the correct ISP-signed file, using a wired connection, and post-updating with a factory reset—you will breathe new life into your old ONT.

: Open a browser and enter 192.168.100.1 (or the IP on the router's nameplate). Use the default credentials: Username: root , Password: admin . Newer firmware versions optimize how the router handles

: Once updated, the firmware typically cannot be reverted to a previous version. Firmware Downloads

Nodes Setup

Finally configure and initialize the other cluster nodes. List the machines that will act as region server in conf/regionservers, one address per line line.

If needed update /etc/hosts according to Hadoop tutorial hints.

Once done, propagate the setup throw the cluster:

 #!/bin/bash

 # Build configured HBase tar.
 mkdir -p /tmp/distr/
 tar -czf /tmp/distr/hbase.tgz /usr/local/hbase-0.94.27

 # Distribute to each region node
 while IFS='' read -r node_ip; do
     scp /etc/hosts hduser@$node_ip:~/
     scp ~/.profile ~/.vimrc hduser@$node_ip:~/

 	scp hbase.tgz hduser@$node_ip:~/

 	ssh -o StrictHostKeyChecking=no -tt hduser@$node_ip <<EOF
 sudo mv $HOME/hosts /etc/

 # Install & link & fix permission
 sudo tar -zxf $HOME/hbase.tgz -C /
 sudo ln -s /usr/local/hbase-0.94.27 /usr/local/hbase
 sudo chown -R hduser:hadoop /usr/local/hbase*

 # Create zookeeper directory (even if not needed)
 sudo mkdir -p /usr/local/zookeeper
 # Fix permission
 sudo chown -R hduser:hadoop /usr/local/zookeeper

 # Raise the limit for max opened files (DB srv)
 sudo sysctl -w fs.file-max=100000

 # Required due to -tt option
 exit
 EOF
 done < /usr/local/hbase/conf/regionservers

Start

That's the end of the journey: enjoy your new HBase cluster!

Start it running start-hbase.sh