Sinotimer Tm630s Manual -

Connect the main to Terminal 1 and bridge it over to Terminal 3 (COM) using a small jumper wire. Connect the main Neutral wire to Terminal 2 .

Press until the correct day of the week appears at the top of the screen. Press H+ to set the current hour. Press M+ to set the current minute. Release the 🕒 (Clock) button.

To add more programs (2 ON/OFF, 3 ON/OFF, etc.), simply press again and repeat the steps. When finished, press the button to save and return to the main screen. 🔄 4. Understanding the MANUAL Button Modes Pressing the button cycles the timer through four distinct states: sinotimer tm630s manual

He drove back to the abandoned tileworks under a sky that reddened into purple. There, under the tarp, he installed the timer. The press responded with a mechanical cough and a slow, thoughtful rotation, as if waking from a long dream. Clay dust shivered down into the light. For a moment the building felt crowded with ghosts: the workers who had fed the press like a creature, the hand that had once scrawled “Works after storm, 1998,” the rhythm of a thousand tiles stamped and stacked.

The TM630S-1 is for 100–130V systems, while the TM630S-2 is for 200–250V. Connect the main to Terminal 1 and bridge

Release the button. The current time is now locked in. 5. How to Program Schedules (On/Off Timers)

is an robust tool for automation when programmed correctly. By following this manual—setting the current time, creating ON/OFF programs, and setting the mode to "AUTO"—you can effectively manage your electrical devices, saving time and energy. Press H+ to set the current hour

⚠️ When switching back to AUTO , pay attention to the current time. If the timer is supposed to be active right now, cycle the manual button until it reads ON AUTO . If it is supposed to be quiet right now, cycle it until it reads AUTO OFF . 🔍 Troubleshooting Common Issues The screen is completely blank

The output is currently off, and the device will follow the programmed schedule moving forward. 🛠️ Troubleshooting and Maintenance Keypad is Unresponsive Cause: The automatic button lock feature is engaged.

Verify your wiring. Remember that Terminals 3 and 6 are independent "dry" switch contacts. They do not output voltage on their own; you must run a live wire (jumper) into them to switch power outward.

Hold CLOCK and press MANUAL to toggle between 12-hour and 24-hour formats. 5. Troubleshooting (TM630S Manual FAQ) 1. Timer not turning on the load? Ensure the device is in AUTO mode. Check the wiring, specifically the 3 and 4 terminals.