Neoprogrammer 21 019 Ch341a — Best

Professional audio equalizer with unlimited filters, low latency, and VST plugin support for Windows

Download Equalizer APO

Equalizer APO is an open-source graphical equalizer for Microsoft Windows. Equalizer APO was developed by Jonas Thedering and is freely available to download. Equalizer APO packs many awesome features, and it's exceptionally easy to use. Equalizer APO is very lightweight and uses very minimal system resources; thus, you do not need to worry about CPU usage at all. This website has no affiliation with the actual developer and the content of this website should be used only as a guide.

Table of Contents

Equalizer APO Features

Equalizer APO comes with many features such as unlimited filters, compatibility with multiple channels, fast response times, and a very easy to use interface that also supports VST plugin integration. The latest version of Equalizer APO was released on 2019-06-10. This guide is more focused on Twitch streaming for new users and is not meant for advanced power users. So, if you're looking for more advanced documentation, we highly recommend that you check the Equalizer APO configuration documentation.

Unlimited Filters

Add as many audio filters as you need without any restrictions.

Low Latency

Experience real-time audio processing with minimal delay.

Low CPU Usage

Lightweight design ensures minimal system resource consumption.

Multichannel Support

Compatible with any number of audio channels.

VST Plugin Support

Integrate your favorite VST plugins seamlessly.

Modular UI

Easy-to-use graphical interface with modular design.

Equalizer APO Installation

In this Equalizer APO installation guide, we're going to show you how to setup and install Equalizer APO on your computer. We'll be using pre-amplification settings that already comes with this software, which will be enough for most people.

Download Equalizer APO

Neoprogrammer 21 019 Ch341a — Best

CH341A Black Edition (USB 2.0, CP2102 or genuine WCH chip) – sold with a SOP8 test clip and 1.8V adapter board.

Before connecting your CH341A programmer, you need to install the appropriate drivers:

| Button | Action | |---|---| | | Auto-detects the chip ID (if supported) to confirm physical contact with pins. If detection fails, do not proceed. | | Read IC | Immediately hit "Read IC" to backup the original contents. Save as original_backup.bin . This is your "undo" button. Never skip this, even if you think you have a clean firmware file. | | Erase IC | Perform a "Chip Erase" to clear the memory completely. | | Blank Check | Run a "Blank Check" to ensure the chip is truly empty (all 0xFF). | | Open | Load your new firmware (the BIOS file or bootloader). | | Write IC | Click "Write IC". Enable the "Verify" checkbox in the dropdown menu next to the button. | | Verify | After the write is complete, run a manual "Verify" to compare the buffer with the chip contents. |

The most popular version is the "土豪金" or "gold" CH341A, featuring a distinctive gold-colored edge and a metal casing. Other variants include the "black" version (black PCB with gold edge) and various form factors with built-in SOP8 test clips. neoprogrammer 21 019 ch341a best

The power of lies in its ability to program obscure microcontrollers. Supported Categories:

A Windows-specific tool that adds extra functionality to CH341A-based programmers, including support for I²C, SPI, SMBus, MDIO, and smart batteries.

To understand the utility of NeoProgrammer, one must understand the hardware it controls. CH341A Black Edition (USB 2

That has changed. Enter .

First, it offers an . Version 2.1.0.19 includes definitions for thousands of SPI flashes, EEPROMs (24C, 93C series), and even some microcontrollers. You rarely need to manually enter chip IDs; the software identifies the chip instantly.

is widely considered the definitive software companion for the CH341A programmer. It transforms a budget hardware tool into a reliable instrument for reading and writing flash memory. For technicians and hobbyists working with SPI flash or I2C EEPROM chips, this specific combination offers the best balance of cost, compatibility, and usability. | | Read IC | Immediately hit "Read

If NeoProgrammer fails to detect your chip:

: One of its best features is the "Detect" button, which accurately identifies your chip’s voltage and capacity—preventing common flashing errors. Speed & Stability

Equalizer APO Installer Device Selection
2

Select Audio Devices

In the middle of the installation process, you will be asked to select the audio devices that the APO Equalizer is to be installed on. It's better to check your audio output devices first and select instead of selecting all devices. After choosing the devices, the installation will go as normal, and at the end, you will be asked to reboot your computer.

Using Equalizer APO

Once you install Equalizer APO and reboot the computer, you can launch the Equalizer APO by navigating to your Program Files and looking for Equalizer APO inside the App folder. You can also launch Equalizer APO from the taskbar launch icons.

Equalizer APO Main Interface

Main Interface

When you launch it, you will get a screen like this. This is the main screen of Equalizer APO. It looks complicated because it has so many features, but in reality, it's super easy to work with APO Equalizer.

Equalizer APO Basic Amplifier

So now, what I'll demonstrate is how to amplify your mic or speaker volume using Equalizer APO. I'm not going to talk much about the APO Equalizer interface because you can explore all of the settings by yourself and the sky is the limit.

Creating New Configuration

On this main screen, you will see three configuration tabs already there. You will need to remove them all in order to create a fresh new configuration tab.

Include Configuration

Then click on the small green colored plus mark, and you will get a drop-down menu. From there, go to Control and then Include and this will create a new tabbed item on your interface.

Browse for File

It says "No file is selected" because we still haven't created the actual file yet. Now, click on the icon that looks like a folder and you will be asked to select a text file.

Adding Configuration File

In here, you will create a new file. You can enter any name you want (for demonstration purposes, I'm going to name it Tutorial) and select the file that you just created.

Insert Configuration

Once we're back to this screen again, click on the up arrow icon and you will be navigated to a new tab.

Device Selection

In this step, we're going to add a device to Equalizer APO so we can amplify the sound output. Click on the green colored plus icon once again and then go to control and devices.

Audio Device Selection

Then, on the device selection menu, untick the select all options checkbox and now you can select the devices you want to amplify. I've selected my speakers as the output device, but you can amplify any device you want.

Adding Preamplification Filter

Once you're done with adding a device, stay on the same screen. Next, we're going to add the Amplification preset. Now, click on the plus icon again and go to basic filters. In there, select the Preamplification filter and you will get a control as the image below. Now, you can use this to amplify your output sound for the selected device.

Amplifier Analysis Panel

At the bottom of the screen, you can see the Analysis Panel. Now you've successfully amplified your output sound and all you have to do is go to File and Save.

Saving Configuration

Close the current tab and you will see the main screen again. On there, click on the power button icon to turn on the filter and now you're good to go. You can play some music to see if it works. If it doesn't work, delete every filter and follow the steps again while watching the video.

CH341A Black Edition (USB 2.0, CP2102 or genuine WCH chip) – sold with a SOP8 test clip and 1.8V adapter board.

Before connecting your CH341A programmer, you need to install the appropriate drivers:

| Button | Action | |---|---| | | Auto-detects the chip ID (if supported) to confirm physical contact with pins. If detection fails, do not proceed. | | Read IC | Immediately hit "Read IC" to backup the original contents. Save as original_backup.bin . This is your "undo" button. Never skip this, even if you think you have a clean firmware file. | | Erase IC | Perform a "Chip Erase" to clear the memory completely. | | Blank Check | Run a "Blank Check" to ensure the chip is truly empty (all 0xFF). | | Open | Load your new firmware (the BIOS file or bootloader). | | Write IC | Click "Write IC". Enable the "Verify" checkbox in the dropdown menu next to the button. | | Verify | After the write is complete, run a manual "Verify" to compare the buffer with the chip contents. |

The most popular version is the "土豪金" or "gold" CH341A, featuring a distinctive gold-colored edge and a metal casing. Other variants include the "black" version (black PCB with gold edge) and various form factors with built-in SOP8 test clips.

The power of lies in its ability to program obscure microcontrollers. Supported Categories:

A Windows-specific tool that adds extra functionality to CH341A-based programmers, including support for I²C, SPI, SMBus, MDIO, and smart batteries.

To understand the utility of NeoProgrammer, one must understand the hardware it controls.

That has changed. Enter .

First, it offers an . Version 2.1.0.19 includes definitions for thousands of SPI flashes, EEPROMs (24C, 93C series), and even some microcontrollers. You rarely need to manually enter chip IDs; the software identifies the chip instantly.

is widely considered the definitive software companion for the CH341A programmer. It transforms a budget hardware tool into a reliable instrument for reading and writing flash memory. For technicians and hobbyists working with SPI flash or I2C EEPROM chips, this specific combination offers the best balance of cost, compatibility, and usability.

If NeoProgrammer fails to detect your chip:

: One of its best features is the "Detect" button, which accurately identifies your chip’s voltage and capacity—preventing common flashing errors. Speed & Stability

Developer Credits

Our sincerest thanks to Jonas Thedering and the other contributors who helped to develop Equalizer APO.