Only plug the unit into a standard 120V AC grounded outlet. Do not use the laminator near water or with wet hands.
If you prefer a physical booklet to keep next to the machine:
: Ensure there is at least 18 inches of free space behind the machine so documents can exit freely without bending or jamming.
Center the document inside the pouch, leaving roughly an equal 1/8-inch border on all sides to guarantee a secure, waterproof seal. Step 5: Feeding the Laminator staples 17466 laminator manual
Keep the pouch straight and centered. Guide it gently until the motorized rollers catch the plastic and begin pulling it automatically.
Switch the machine to the "Cold" setting if available (some models require specific cold pouches). Follow the same loading procedure as hot lamination. 3. Important Operating Tips (Best Practices)
Never cut a pouch before laminating; always trim excess plastic after the process is complete. 4. Feeding the Document Only plug the unit into a standard 120V AC grounded outlet
Use high-quality 3-mil to 5-mil pouches for the best results.
If adhesive builds up, use a soft cloth with a small amount of isopropyl alcohol to gently wipe the rollers while the machine is off and cool.
A 9.5-inch throat width allows for standard letter-sized documents (8.5" x 11") and smaller items like business cards. Center the document inside the pouch, leaving roughly
Gently guide the pouch into the slot until the motorized rollers take hold.
The manual suggests very little maintenance, but experienced users know these tricks:
Place your document inside a compatible thermal laminating pouch.