KNOWN_CONFIGS = "L805": "waste_ink_counter": (0x1A0, 2), # offset, length (words) "serial_offset": 0x1C0, "region_offset": 0x1E0, "checksum_range": (0x000, 0x7FF), # CRC covers this block "checksum_pos": 0x7FC, , "L3110": "waste_ink_counter": (0x1B0, 2), "serial_offset": 0x1D0, "region_offset": 0x1F0, "checksum_range": (0x000, 0x7FF), "checksum_pos": 0x7FC, , "XP-4100": "waste_ink_counter": (0x1C0, 2), "serial_offset": 0x1E0, "region_offset": 0x200, "checksum_range": (0x000, 0xFFF), # 24C16 "checksum_pos": 0xFFC, , "generic_24c08": "waste_ink_counter": (0x1A0, 2), "checksum_range": (0x000, 0x7FF), "checksum_pos": 0x7FC,
Once you have (a) your original dump backed up and (b) a patched dump for your exact model, you write it back to the chip.
If a firmware or EEPROM write fails, the printer may get stuck in "Recovery Mode." You will need the Epson Firmware Recovery Tool to restore the basic system. eeprom dump epson patched
"EEPROM dump Epson patched" refers to the use of modified service tools to read, modify, and write back EEPROM data, primarily to reset waste ink counters that have locked a printer. Patched adjustment programs, commercial tools like WICReset, and open-source SNMP utilities all offer ways to accomplish this, each with different trade-offs in cost, convenience, and risk.
When the waste ink counter reaches its maximum threshold, the printer triggers a hardware lock, displaying a "service required" error. While utility software can sometimes reset this via USB, a corrupt or deeply locked mainboard can be revived by flashing a clean, patched EEPROM dump with zeroed counters. Recovery from Brick States messy) or reset the EEPROM counter.
Official over-the-air (OTA) updates from manufacturers often close security loopholes and block third-party ink compatibility. Once updated, a printer typically blocks standard downgrade attempts. Flashing a patched EEPROM dump is a hardware-level bypass that overrides the bootloader's version checks, allowing a technician to revert the machine back to a more permissive factory firmware state. The Anatomy of a Patched Dump: How It Works
– using a patched EEPROM dump to sell "compatible" cartridges as new could lead to lawsuits for trademark and fraud. If you share with third parties
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The printer will not function until you either replace the physical pad (expensive, messy) or reset the EEPROM counter.