: Weatherproof cameras equipped with infrared night vision LEDs.
Scan the QR code on the camera (usually located on the bottom or back). Enter your home Wi-Fi network credentials ( Wi-Fi only, is not supported).
: In the DVR's "Network" settings, scan the QR code displayed on the monitor using your phone's app to link the devices for remote access. zclever security camera manual
Press and hold the button down for while the camera is powered on.
If you have a Zclever and have performed a factory reset, you may need the default null password to set it up. According to support documentation, you can reset the password with the following method: : Weatherproof cameras equipped with infrared night vision
Place indoor cameras on flat surfaces like shelves, desks, or refrigerators. If wall-mounting, attach the plastic base plate using the provided screws, then twist the camera base into the slots until it clicks. Outdoor Models
For generic DVR or system access, try these common default credentials: : In the DVR's "Network" settings, scan the
Tap the "+" icon in the top right corner of the app screen.
Here are some tips and tricks to help you get the most out of your ZClever security camera:
Connect the cable to the micro-USB or DC port on the camera. Wait 30–60 seconds for the camera to boot up.
Check connectivity at the mounting location using your phone before drilling. 5. Key Features and App Settings Once set up, explore these features in the app: Live View: View your camera feed in real-time.