Caraflo V200 Shower Instructions [FREE]

Carefully tighten the compression fittings behind the mixer unit. 5. Replacing Parts

Connect your flexible, anti-kink shower hose to the central bottom 1/2" thread outlet. Daily Operating Instructions

The is a thermostatic shower mixer valve widely used in static caravans and holiday homes, known for its ability to be easily disconnected and drained to prevent frost damage during winter. It is a direct replacement for the older V100 model and is compatible with various caravan brands like Swift, Willerby, and ABI. Operating Instructions & Safety caraflo v200 shower instructions

| | Value / Requirement | |---------------|-------------------------| | Maximum static pressure | 10 Bar | | Flow pressure (hot & cold) | 0.5 to 5 Bar | | Hot supply temperature | 55 to 65°C | | Cold supply temperature | ≤ 25°C | | Maximum mixed water temperature | 46°C (recommended 41°C for showers) | | Hot water must be at least | 10°C above required blend temperature | | Pipe centres (tail spacing) | 45mm | | Depth from wall | 75mm | | Height (vertical installation) | 165–175mm depending on model | | Outlet diameter | 20mm |

Screw the Caraflo V200’s connecting nut onto the shower arm by hand. Turn clockwise until it stops. Carefully tighten the compression fittings behind the mixer

to remove debris before fitting the mixer to prevent damage to the thermostatic valve. Leisure Parts 4U Operating Specifications Temperature Range Hot supply: Cold supply: Water Pressure : Recommended operating pressure is between 0.5 and 5 bar Static Caravan Spares Maintenance & Seal Replacement

Turn the shower on and set the temperature handle to the 38°C position. Insert a thermometer into the water stream. Daily Operating Instructions The is a thermostatic shower

Fully compliant with NCC certification, WRAS approval, and TMV2 scheme standards for safety and performance.