Gorenje Pf Error Better |top| Jun 2026

An ounce of prevention is worth a pound of cure. Here are some tips to help avoid the PF error in the future:

A: Usually, no. Most Gorenje models have non-volatile memory that saves your cycle progress and settings, even during a power cut.

Did the power fail 40 minutes into a 2-hour cycle? Don’t just reset and lose your detergent and time. Do this better trick:

This is more advanced, but still cheaper than a service call. gorenje pf error better

To ensure the PF error does not return frequently:

On the control board, a power relay can develop carbon pitting over time. This causes intermittent connection. Advanced better fix: Desolder the relay, open it, and clean contacts with fine sandpaper, or replace the relay (part number G2R-1-E-T130). Only for experienced electronics hobbyists.

Voltage dips or spikes that cause the control board to reset. An ounce of prevention is worth a pound of cure

This article details what causes the Gorenje PF error across different appliance types and provides actionable steps to safely resolve and prevent it. 1. Understanding the Gorenje PF Error Code

While it is standard for Gorenje washing machines, ovens, and dryers to flash "PF" after a blackout, seeing it constantly means something is wrong. This comprehensive guide breaks down how to clear the code, troubleshoot the root causes, and optimize your appliance for long-term stability. Understanding the Gorenje PF Error Code

“I replaced the main board for €180 because of random PF. It fixed nothing – the real issue was a loose neutral in my wall socket.” Did the power fail 40 minutes into a 2-hour cycle

You’ll pay $80–150 for a service visit, only to hear: “It was just a loose plug.” Don't be that person.

Leave it unplugged for at least 5–10 minutes . This allows the capacitors in the control board to discharge. Reconnect: Plug the machine back in.

| Step | Action | What It Tells You | |------|--------|--------------------| | 1 | Clear PF (turn dial to OFF). Run a short rinse cycle. | If no PF, likely a one-time grid event. | | 2 | Repeat cycle but wiggle the power cord near plug/socket. | PF appears → bad connection. | | 3 | Plug machine into a different circuit (no other appliances). Run heavy 60°C wash. | PF gone → original circuit overloaded. | | 4 | Measure voltage at socket during wash (use a multimeter). Drop below 190V? | Undersized wiring or long extension cord. | | 5 | PF happens even on a dedicated circuit with stable voltage. | Suspect main PCB (capacitor failure). |