Adjustment Program Epson 1390 Resetter Fixed Jun 2026

Any specific showing up in the adjustment program

If you encounter errors while trying to execute the reset, try these quick fixes:

The , also referred to as a "resetter," is a critical utility for owners of the Epson Stylus Photo 1390. It is primarily used to clear the "Service Required" error, which occurs when the printer’s internal waste ink pad counter reaches its maximum limit . What is the Epson 1390 Resetter?

Epson designs its printers with internal porous pads to absorb excess ink during head cleanings and printing. To prevent ink from leaking out of the machine and onto your desk, the printer uses a digital counter called the . adjustment program epson 1390 resetter fixed

This is the preferred method for high-volume printing. Divert the internal waste ink tube out through the back of the printer chassis and feed it into a small plastic bottle. This allows you to easily empty the waste ink whenever it fills up, completely eliminating the need to ever change internal pads again. Troubleshooting Common Resetter Errors

The program will display a message saying: "Please turn off the printer."

A: The Adjustment Program can read your printer's internal error history. Use this to get a specific error code (e.g., APG-related error) and search for its exact meaning online. Understanding the underlying error is much better than just replacing parts randomly. Any specific showing up in the adjustment program

| Problem | Fix | |---------|------| | Program doesn’t detect printer | Reinstall USB driver; disable printer spooler; use Windows 7/XP compatibility mode | | Counter resets but error returns | Waste pad is physically full – replace or install external waste tank | | “Communication error” | Run program the printer fully boots; try different USB port | | Program crashes on open | Disable antivirus temporarily (false positive common) |

Cancel all pending documents in your Windows print spooler.

: Identifies specific hardware failures beyond standard blinking lights. Reset Procedure (Step-by-Step) Epson designs its printers with internal porous pads

: Clears the internal counter that triggers the "end of service life" error.

Click , then click the Particular Adjustment Mode button on the right side. Phase 3: Resetting the Counter

Cancel all pending documents in your Windows print spooler.

Keep the box checked and click the button to clear the memory. Click OK on the confirmation popup prompt. Phase 4: Completing the Process

If you've used any resetter before, leftover files can cause conflicts. Navigate to your C drive and check for a folder named . If it exists, delete it entirely.