Tvzt-3010-03up Led - Repack

The designation is not a standard industry-wide code like a resistor or capacitor value; rather, it is a proprietary manufacturer’s part number, most commonly associated with LCD TV backlight strips . These strips are the unsung heroes behind the bright, clear images on flat-screen televisions and monitors.

| Parameter | Typical Value | | :--- | :--- | | | 3.0mm (L) x 1.0mm (W) x 1.2mm (H) | | Forward Voltage (Vf) | 3.0V – 3.4V per LED (Standard) or 6V | | Forward Current (If) | 150mA – 300mA (depending on TV brightness) | | Power per LED | 0.5W – 1W | | Color Temperature | 6500K – 8500K (Cool White) | | Luminous Flux | 80 – 120 lumens per LED | | Beam Angle | 120° – 140° | | Lifespan (L70) | 30,000 – 50,000 hours | | Substrate | Aluminum-core PCB (MCPCB) for heat dissipation |

: Frequently seen in 2-LED plate circuit board replacements for driveway or walkway lighting. Troubleshooting and Driver Compatibility A common issue reported with fixtures using the TVZT-3010-03UP

Understanding the TVZT-3010-03UP LED : Specifications, Failure Modes, and Repair Solutions tvzt-3010-03up led

Are you comfortable doing basic or do you prefer a plug-and-play kit?

seconds) to prevent damaging the phosphorous layer, which causes yellowed light Oskolchip.

: In standard configurations, these LEDs drive a load of approximately 6 to 9 watts . The designation is not a standard industry-wide code

If used outdoors, ensure the replacement driver is rated for the environment (e.g., IP42 or IP67 ) and can handle low startup temperatures. General Installation Tips

The internal components of these outdoor drivers are encased in a solid black protective epoxy to shield them from environmental moisture.

Yes, but with caution. The TVZT-3010-03UP LED is small. If you have soldering experience and a hot air station, it is cheaper than replacing the whole strip. However, note that if one LED failed due to heat, the others are likely close to failure. Replace all LEDs on that strip or the entire strip. If used outdoors, ensure the replacement driver is

This component is designed primarily for status indication and backlighting in space-constrained electronic applications. Its "UP" suffix typically denotes a specific lens configuration or upward-firing emission pattern, making it distinct from side-emitting variants.

diodes are highly durable, replacing the faulty driver will breathe new life into your fixture. Since the original MD:LED-D35-2

: Always shut off the main circuit breaker before handling any wiring to prevent electrical shock.

The is a specialized, high-brightness SMD component critical for precise backlighting in TVs, medical monitors, and industrial displays. Its distinguishing feature is the "UP" brightness bin, which ensures uniform light output.