Canon Ir 2016 Download Standby Error Verified [top]

Have you recently opened or of the machine? Share public link

If the hardware connections are secure but the error persists, the firmware may be corrupted. This requires a service tool (SST or Service Support Tool) and a USB connection to a PC.

Some technicians use a physical jumper (JP141) on the main board to force a download state, though this is risky and often unnecessary if the screen already shows "Download Standby".

the power cord back in while still holding that Stop key. canon ir 2016 download standby error verified

The phrase "Download Standby" is a literal state indicator. When your Canon iR2016 displays this, it has entered a special boot mode known as "download mode". Instead of launching the standard operating system that allows copying, scanning, and printing, the machine is waiting for a signal from a computer. In this state, it's prepared to receive new firmware—the vital, low-level software that controls the device's hardware.

While waiting, restart the computer connected to the copier to clear stalled print queues.

[Connect to SST] ──> [Flash 'Boot' Sector First] ──> [Flash 'System' Software] ──> [Reboot Unit] Have you recently opened or of the machine

If the machine boots normally, the error was likely a temporary glitch.

The error on the Canon imageRUNNER (iR) 2016 Go to product viewer dialog for this item.

If the error persists, technicians recommend flashing the rom first, followed by the System software. Some technicians use a physical jumper (JP141) on

The "Download Standby" (sometimes referred to as "Downloader Stand-By") error is not a standard paper jam or toner issue. When this appears on your Canon iR 2016's LCD, the machine has entered a "Download Mode". This usually means that the core system software (firmware) controlling your copier has become corrupted or failed to load correctly.

Flip the main physical power switch on the side of the copier off.

Desolder the NVRAM chip (usually a M48Z08 or similar) and replace it with a pre-programmed one from a donor board or order a replacement from Canon parts distributors.