Warning: Installation must be performed by a qualified electrician. Ensure the power is disconnected before wiring.
To lock the thermostat at a specific temperature indefinitely (disabling the timer program):
The Eberle Instat 6 requires proper installation and wiring to ensure safe and effective operation. Refer to the following guidelines:
: Install approximately 1.5m above the floor on an internal wall, away from draughts, direct sunlight, or heat sources. Wiring Precautions
If you want to change the temperature without affecting your permanent schedule, simply press or - on the main screen to set a new target. This temperature remains active only until the next programmed switching time occurs. Holiday Mode eberle instat 6 user manual english
If the device behaves erratically or you want to wipe all programming: Open the battery compartment or remove the front cover. Look for a small pinhole labeled .
Set the desired background setback temperature (e.g., 10°C).
The Eberle Instat 6 features a user-friendly interface and a range of innovative functions, including:
: Use the > button to select the "Day" position, then use + or - to set the day and specific times. Warning: Installation must be performed by a qualified
5°C to 30°C (in 0.5°C increments)
Do you still have a specific error code not listed here? Refer to page 24 of the official for the full error matrix.
If you need the (for cycle rates, valve protection) The exact model variant (e.g., Instat+ 6R, 6B)
In this comprehensive guide, we will walk you through everything you need to know to operate your Instat 6, from basic setup to advanced programming. Refer to the following guidelines: : Install approximately
If you need help tailoring this setup to your specific home, let me know:
Use the + or – buttons to choose a specific day (1=Mon, 7=Sun) or a block of days (e.g., Mon–Fri). Set Event Time: Press > to select the event number (1 through 6). Use + and – to set the start time for that period. Set Event Temperature: Press > again to move to the temperature setting. Use + and – to adjust the desired heat level.
Eberle Instat 6 User Manual: Complete Operating & Programming Guide
If your screen is blank or displays a flashing battery symbol, you must install or replace the batteries.