1 x PCIe x16 slot for graphics cards and 2 x PCIe 2.0 x1 slots.
Secure the motherboard into the chassis and connect the necessary power lines. Mounting the Board
: Ensure the SATA mode is set to AHCI for modern SSD performance. asus h81m-k motherboard setup
Open the socket lever, align the triangular mark on your processor with the mark on the socket, and gently seat the CPU. Close the lever to lock it. RAM (DDR3): This board has two yellow DIMM slots supporting up to
Look for the gold triangle on the CPU corner and align it with the triangle on the socket. 1 x PCIe x16 slot for graphics cards and 2 x PCIe 2
Push down the plastic locks on the outer edges of the RAM slots.
Go to the tab. Under Boot Option Priorities , set your installation media (such as your USB flash drive containing Windows) as Boot Option #1 . Step 3: Enable XMP (Optional) Open the socket lever, align the triangular mark
In EZ Mode, take a moment to verify that your hardware is being detected correctly. The screen will display:
Plug the 4-pin ATX12V cable into the top-left connector near the CPU socket to provide dedicated processor power. Front Panel Cables
: Connect to the two pins labeled "PWRBTN". This controls the case power button. Reset SW : Connect to the two pins labeled "RESET".