Top Row: [ 2 ] [ 4 ] [ 6 ] [ 8 ] Bottom Row: [ 1 ] [ 3 ] [ 5 ] [ 7 ] [ X ] (X = Empty / No Pin) Use code with caution. Pin Assignments
An in-depth guide to the Acer IPIMB-AR (Rev 1.02a) motherboard, including specifications, layout, front panel pinouts, and troubleshooting steps. Introduction to the Acer IPIMB-AR Motherboard
4 DIMM slots supporting up to 16GB of DDR3 1333/1600 MHz non-ECC unbuffered memory. Acer Ipimb-ar Rev 1.02a Manual
The header consists of two parallel rows of pins. One row contains odd-numbered pins, while the other contains even-numbered pins.
"Where did you dig this up?" Elias muttered to himself, his voice barely audible over the hiss of steam vents from the street below. "A museum? A landfill?" Top Row: [ 2 ] [ 4 ]
4-pin 12V Connector (Located near the CPU socket). CPU Fan: 4-pin PWM header (Labeled CPU_FAN). System Fan: 3-pin or 4-pin header (Labeled SYS_FAN). 🖥️ Rear I/O Ports
4 x DDR3 DIMM slots (Dual Channel, up to 32GB total, 1333/1600 MHz). Form Factor: Micro-ATX (approx. 24.4 cm x 24.4 cm). Expansion Slots: 1 x PCI Express x16 (Blue). 3 x PCI Express x1. 1 x Mini PCI Express (often used for Wi-Fi cards). Storage: 1 x SATA III (6.0 Gb/s) — usually the black or red port. 5 x SATA II (3.0 Gb/s). 🔌 Front Panel Header Pinout The header consists of two parallel rows of pins
Intel Core i7, i5, i3, Pentium, and Celeron (Sandy Bridge and Ivy Bridge)
This motherboard is based on the , offering a solid foundation for Sandy Bridge and Ivy Bridge processors. Socket: LGA 1155
Elias focused on the most treacherous part of any build: the Front Panel Connectors