The Epson POS Printer Driver V7.17 is a software driver designed to enable communication between your Epson POS printer and your computer. This guide will walk you through the installation and configuration process, ensuring that your printer is properly set up and ready to use.
Manufacturers now offer Universal POS Drivers (e.g., Epson TM‑USB, APD 8.x) that support 64‑bit only, better error handling, and Windows 11.
: The installer usually auto-detects your Windows version, but verify it manually. Select Printer Type : Choose POS-58 if you use a 58mm paper width. Choose POS-80 if you use an 80mm paper width.
Linux and Mac support are available in this specific version. pos printer driver v7 17
Set it to or Page [Cut] depending on whether you want a cut after the entire receipt or between distinct pages. 3. Logo and Branding Graphics
The is a standard software utility used to connect various thermal receipt printers—often from brands like Xprinter or Zjiang—to Windows operating systems. It enables your computer to communicate with the point-of-sale hardware to print receipts, tickets, and kitchen orders. 🛠️ Installation Guide
If you are running Windows 7 or an embedded POS system from 2015-2018 , v7.17 is your gold standard. If you are on Windows 11, stop reading and seek version 7.22 or higher. The Epson POS Printer Driver V7
The printer is assigned to the wrong virtual USB port.
This driver is designed for a wide range of devices, including but not limited to:
. This driver allows Windows systems to communicate with POS hardware via USB, Ethernet, or Bluetooth connections. Key Installation & Setup Features : The installer usually auto-detects your Windows version,
In Printer Properties, check the "Ports" tab. Ensure the correct USB or IP port is checked.
This driver is frequently found in the box with unbranded or "white label" thermal printers sold on major e-commerce platforms. It serves as a "catch-all" for various 58mm and 80mm thermal printers. ⚠️ Important Considerations
Go to Printer Properties > Ports . Check the box for a different USB port (e.g., switch from USB001 to USB002 ) and click Apply until the printer responds.