Leica Tcr805 Total Station User Manual -

Look at the ground mark and adjust the tripod legs until the laser dot sits precisely in the center of your ground nail or monument.

Push the tripod shoes firmly into the ground to ensure stability. Step 3: Leveling the Electronic Bubble

The Leica TCR 805 total station is backed by a comprehensive warranty and support program. Contact Leica support for assistance with any questions or issues.

The full user manual is split into two parts: leica tcr805 total station user manual

Precise leveling is critical. Any error at the base multiplies over long distances. Step 1: Tripod Placement Extend the tripod legs to a comfortable chest height.

Calculates the 3D distance, grade, and azimuth between two measured points.

Aim at a sharp, well-defined target roughly 100 meters away in Face 1 (Telescope normal). Take an angular reading. Look at the ground mark and adjust the

The TCR805 features an alphanumeric keyboard and a large LCD for navigating its on-board software. Key software routines include: Measurement Modes:

Turn on the electronic laser plummet to position the instrument directly over your ground point. Use the tripod legs to center the circular bubble.

The original Leica TCR805 manual was written for Windows 98-era data loggers and serial ports. To adapt it for 2025 workflows, you need to reinterpret a few sections: Contact Leica support for assistance with any questions

To tie your survey into a local or global coordinate system, you must orient the instrument. Navigate to -> Programs -> Station Setup . Select your Job or create a new one.

Users can switch between "IR" (Infrared) for prisms and "RL" (Reflectorless) modes. On-board Programs: The manual outlines specialized programs for Area Computation Tie Distance (missing line measurement), Reference Lines Rapid Measurement