Id6100 Danieli Manual Hot [work]

| Specification | Detail | | :--- | :--- | | | 830 to 1000 nm (Near Infrared) | | Minimum Object Temp. | ≥ 700°C (1300°F) | | Vertical Field of View | 45° / 30° (Selectable) | | Horizontal Field of View | 0.5° | | Position Resolution | 0.1° | | Supply Voltage | 24 Vdc ± 20% | | Outputs | NPN & PNP Open Collector, Analog (0-10V & 4-20mA) | | Operating Temperature | 0 to +50 °C | | Storage Temperature | -5 to +80 °C | | Protection Rating | IP65 (dust-tight and protected against water jets) | | Weight | Approx. 3 kg (6.6 lbs) without connectors |

Turn the potentiometer up to detect lower-temperature boundaries (near 750 °C) or thin-gauge wire material.

and is primarily used to detect the position of hot material (looping) between mill stands. Core Functionality Operating Principle : The unit uses a high-resolution CCD linear-array photo sensor to detect infrared radiation emitted by hot bodies. Primary Purpose : Designed for loop position control

Refurbished and surplus stock units are available through specialized automation suppliers like Radwell International or MRO Global Solutions , often carrying aftermarket warranties. id6100 danieli manual hot

If you need specific technical documentation, it is recommended to search for "ID6100 Danieli Automation manual" on technical documentation platforms, or inquire directly through Radwell International for repair or replacement services.

: The device uses a line CCD camera and an infrared filter to focus heat emissions onto a linear-array photo sensor. Key Features :

: Includes a built-in self-test function and alignment laser to ensure precision during setup and operation . | Specification | Detail | | :--- |

: Typically operates on 20-30VDC and detects objects within specific temperature ranges, often 750 °C or higher.

This manual aims to provide the necessary information for the of the ID6100 loop detector (D.A. code 5122000021) , covering its operating principle, application field, and spare parts.

: The filtered light focuses directly onto a high-speed CCD linear array photo-sensor. and is primarily used to detect the position

However, I can offer a of what the ID 6100 typically refers to within Danieli Automation’s ecosystem, based on publicly available information and standard industrial automation knowledge.

The Danieli ID6100 is no longer actively manufactured. Ensuring continuous up-time requires preventative maintenance protocols:

Go to Top