Ld-c101 Usb To Ci-v Driver Updated Jun 2026

: Modern drivers often auto-install on newer versions of Windows 10 and 11, though manual installation is a reliable backup.

This usually happens on Windows 10 or 11 with older Prolific chip versions.

Ensure "CI-V Transceive" is turned ON in your Icom radio's settings menu.

: Supports data transfer rates from 300 baud to 3 Mbaud and handles CI-V commands for frequency and mode control. Ld-c101 Usb To Ci-v Driver

The is a critical interface tool for amateur radio enthusiasts who want to bridge the gap between their legacy or modern Icom transceivers and personal computers. By using this cable, operators can automate frequency control, manage logging, and run advanced digital modes through a single 3.5mm "Remote" jack. The Role of the LD-C101 Driver

Ensure your PC chassis and your radio chassis are connected to the same central station ground bus. Ground loops can cause RF feedback, corrupting data transmission or blowing out the USB serial chip entirely.

: Some cheaper versions of these cables use "clone" chips. Official drivers (especially Prolific) may intentionally disable these, leading to a "Code 10" error in Device Manager. : Modern drivers often auto-install on newer versions

Follow the on-screen instructions to complete the installation. 4. Verify in Device Manager (Crucial Step) Right-click the and select Device Manager . Expand the Ports (COM & LPT) section. Look for a device labeled "USB Serial Port (COMx)".

The LD-C101 cable acts as a bridge between your computer’s USB port and the 3.5mm mono remote jack on your Icom radio. While the exterior of the cable is simple, the USB housing contains an integrated circuit (IC) that converts USB data packets into serial TTL data.

For Windows operating systems, the installation process requires the user to install drivers specific to the bridge chip used in the device (usually provided by the manufacturer or downloadable via Windows Update). Once installed, the device appears to software applications as a standard serial port (e.g., COM3, COM4). : Supports data transfer rates from 300 baud

Enables PC control of transceiver frequency, mode, and other settings.

: Your logging software automatically records the frequency and mode of every contact.