: Check the box for Main Pad Counter and click the Check button to see the current usage percentage.
Epson printers include a built-in counter that tracks the amount of waste ink collected during head cleanings. Once this counter hits a specific threshold, the printer stops working and displays a "Service Required" message, often accompanied by two alternating blinking lights. The adjustment program communicates with the printer's firmware to reset this internal counter back to 0%, allowing the device to resume normal operation.
Click the button at the top of the main window. Set the Model Name to L405 . Leave the port selection on Auto Selection or manually choose the specific USB port labeled with your printer's name. Click OK . Step 3: Enter Particular Adjustment Mode epson l405 resetter adjustment program work
: Run the AdjProg.exe file. Click the button and choose the
Epson printers are equipped with a maintenance box (or waste ink pad) located at the bottom of the device. During print head cleaning or power flushing, excess ink is drained into this pad. Epson’s firmware includes a that tracks how many times the printer has cleaned itself and how much ink has been dumped. Once this counter reaches a factory-set maximum (usually around 15,000 to 20,000 pages), the printer locks down. This is not a hardware failure—it’s a programmed safety measure to prevent the pad from overflowing and leaking ink inside the printer. : Check the box for Main Pad Counter
: Restores the internal counter to 0% when the printer indicates it has reached the end of its service life. Maintenance Features
Epson builds an internal counter into the printer's firmware to track ink usage. The Purpose of Ink Pads Leave the port selection on Auto Selection or
Never attempt an EEPROM reset over Wi-Fi, as a temporary signal drop can corrupt the printer firmware.