Fi-80 Dishwasher Manual: Fagor

A light will turn on when the water is hot enough. How to Wash Dishes

Ensure the overflow tube and filters are properly seated before filling. Allow the unit to reach its operating temperatures before starting the first cycle.

Take out the stainless steel scrap filters and rinse them thoroughly under running water.

The Fagor FI-80 features a semi-integrated design where the control panel is located along the front top edge of the door. This interface includes a that serves two key functions: fagor fi-80 dishwasher manual

Is your Fagor FI-80 equipped with a or analog push-buttons ?

The unit must be perfectly level. Use the four adjustable threaded legs to compensate for floor unevenness.

Illuminates when a cycle is actively running. Step-by-Step Operating Instructions A light will turn on when the water is hot enough

7 liters (approx. 1.8 gallons) with a 6.0 kW or 9.0 kW heating element (depending on voltage configuration). Water Consumption: 3 liters (0.8 gallons) per cycle. Required Water Pressure: 20 to 60 PSI (1.4 to 4 bar).

| Feature | Detail | | :--- | :--- | | | Commercial hood‑type dishwasher | | Wash tub capacity | 45 litres | | Heating element (wash boiler) | 4.5 kW (4500 W) – 9 kW (9000 W) depending on variant | | Power supply | 230 V (single‑phase) or 415 V (three‑phase) | | Wash system | Double rotating wash and rinse arms (upper and lower) | | Construction | Stainless steel wash tub, filter trays on wash drum | | Optional models | FI‑80A, FI‑80AR, FI‑80B, FI‑80BT, FI‑80UK, FI‑80W | | Compatible parts | Drain upstand Z710901 / 12023658 (395 mm) | | Timer/programmer | Mechanical timer CDC 7903F (0‑240 seconds) |

This reconstructed manual is for informational purposes. Refer to the original printed manual delivered with your appliance for exact diagrams and legal safety certifications. Take out the stainless steel scrap filters and

Hard water causes calcium setup on the heating elements, which reduces heating efficiency. Drain the machine and refill it with fresh water.

| | Description | | :--- | :--- | | Type | Hood-type commercial dishwasher | | Wash Tub Capacity | 45 liters | | Rinse Water Consumption | 3 liters per cycle | | Wash Temperature | 60°C | | Rinse Temperature | 90°C (high-temperature sanitizing rinse) | | Wash System | Double rotating wash and rinse system (upper and lower) | | Heating Elements | 4.5 kW reinforced stainless steel resistors in the wash tub | | Electrical Connection | 400V - 3+N+E | | Filtration | Filter trays on the wash drum and an interior filter in the drainage system | | Hood | Easy-to-raise, self-balancing hood with a magnetic micro-safety switch | | Temperature Control | Thermostatic control, including a safety thermostat for both wash and rinse cycles | | Built-In Dispenser | Rinse aid dispenser | | Legs | Adjustable for leveling |

Press the (ON/OFF). The power indicator light will illuminate.

The Ultimate Guide to the Fagor FI-80 Dishwasher: Manual, Operation, and Troubleshooting