Ms-7613 Ver 1.1 Motherboard Manual [updated] Site
Typically populated with a factory Wi-Fi card in HP builds. Storage & Power
4x DDR3 DIMM slots (Dual-channel), supporting up to 16GB RAM total (usually supports up to 4GB DDR3 non-ECC DIMMs). Expansion Slots: 1x PCIe x16 (for graphics cards). 3x PCIe x1. 1x PCIe Mini-Card connector. Audio: Integrated High Definition Audio. LAN: Integrated Gigabit Ethernet. Storage: 4x SATA 3.0Gb/s connectors.
The MS-7613 Ver 1.1 relies on the chipset to support first-generation Intel architecture. Component / Feature Specification Manufacturer Name MSI MS-7613 HP / Compaq Name Form Factor Micro-ATX: CPU Socket LGA 1156 (Socket H) Chipset Intel H57 Express PCH Memory Slots 4 × 240-pin DDR3 DIMM Maximum Memory 16 GB Dual-Channel DDR3 Expansion Slots 1 × PCIe x16, 3 × PCIe x1 Storage Connectors 4 × SATA II (3.0 Gbps) Audio Chipset Realtek ALC888S 8-Channel HD Audio Network Interface Realtek RTL811DL Gigabit Ethernet (10/100/1000 Mbps) 🔲 Processor Upgrade Information
Note: While some Socket 1156 boards support Xeon, support on this OEM board is limited to desktop-class processors listed above. 3. Memory Specifications (RAM) The board features four DDR3 DIMM slots. Dual-channel Maximum Memory: Up to 16GB (using 4GB non-ECC DIMMs) Memory Speeds: DDR3 1333 MHz and 1066 MHz DIMM Type: 240-pin DDR3 SDRAM 4. Expansion Slots and I/O Layout ms-7613 ver 1.1 motherboard manual
4x DDR3 DIMM slots, supporting up to 16 GB of non-ECC unbuffered RAM (PC3-10600 or PC3-8500). Pinouts & Connectors
The Intel H57 chipset cannot read modern memory chips. When buying 4GB DDR3 sticks for this motherboard, you must source low-density RAM (2R×8) . This means the RAM stick must have 16 physical memory chips on it (8 chips on each side of the module). Sticks containing only 4 or 8 total chips (high-density) will fail to post or trigger blue screens (BSOD) during OS installation. 4. Motherboard Layout & Internal Headers
The G41 chipset supports a maximum of 4 GB per rank, but only certain double-sided DIMMs. Install RAM in DIMM1 (black slot) first. Use only 2Rx8 modules, not 1Rx4. Typically populated with a factory Wi-Fi card in HP builds
The MS-7613 motherboard is notoriously sensitive regarding RAM compatibility due to older Intel architecture limitations. Core RAM Specs: Dual-channel memory architecture. Module Type: Unbuffered, non-ECC DDR3 only.
This guide provides a detailed overview of the specifications, layout, jumper settings, and upgrade capabilities often sought in the MS-7613 ver 1.1 motherboard manual. 1. Technical Specifications Overview
Elias found the tower at a garage sale for ten dollars—a dust-caked HP Pavilion that looked like it had been used as a doorstop since 2010. When he cracked the side panel, he saw the ink-etched label: . 3x PCIe x1
While the motherboard uses the LGA1156 socket and supports first-generation Core i7 processors (like the i7-860), there are serious limitations. Overclocking, or running the CPU faster than its rated speed, is generally locked or very limited on OEM HP motherboards. More importantly, you cannot install a newer-generation CPU, such as a third-generation Ivy Bridge chip (e.g., i7-3770), as they use a different, incompatible LGA1155 socket.
If you look closely at the bottom right of the board (near the front panel connectors), you might see an unlabeled set of pins.
This board fully supports Windows 7 and 10, but lacks official driver support for Windows 11. 6. MS-7613 Ver 1.1 Troubleshooting
