Biosystems Bts 350 User Manual ((exclusive))

The optical configuration includes pre-installed filters covering crucial wavelengths for routine biochemistry (typically 340, 405, 505, 535, 560, 600, 635, and 670 nm).

The system will automatically execute a Power-On Self-Test (POST) to verify filter wheel alignment, memory integrity, and LED intensity.

| Common Issue | Possible Cause | Suggested Fix | | :--- | :--- | :--- | | | Flow cell is dirty | Clean the flow cell thoroughly. | | (See Fig. in User Manual) | Flow cell not aligned correctly | Gently press the flow cell until it sits properly at the bottom of its holder. | | | Air bubbles in the system | Check the peristaltic pump tubing for punctures and replace if necessary. |

Wear appropriate personal protective equipment (PPE), including lab coats, disposable gloves, and protective eyewear during operation and maintenance. Chemical Safety

For research labs, the standard factory methods may not be enough. The user manual contains a chapter on “User Defined Methods.” This allows you to program: biosystems bts 350 user manual

Here’s a useful, concise addendum or quick-reference insert related to the user manual. This piece addresses a common gap in many lab manuals: daily troubleshooting & maintenance log combined with a sample-to-result checklist .

Use a grounded power outlet to prevent electrical interference.

Features a built-in peristaltic pump and a temperature-controlled flow cell (adjustable to 25°C, 30°C, or 37°C) to manage sample aspiration cleanly.

The user manual identifies several common "Error Codes" or flags: | | (See Fig

: Lag phases and read intervals (for Kinetic modes).

Immerse the aspiration probe in distilled water and select the function. Aspirate at least 2 mL of water to prime the lines. Performing a Blank Measurement Select the desired assay from the test menu.

: The analyzer supports several measurement methods, including: Fixed Time Differential Mode Quality Control (QC)

To install and set up the Biosystems BTS 350: Troubleshooting Common Error Codes

Run normal and abnormal control matrices daily before processing patient samples.

By mastering the Biosystems BTS 350 user manual, you can work confidently and safely with biological agents, advancing your research and applications in the life sciences.

Check the aspiration volume. If the volume is inconsistent, inspect the peristaltic pump tubing for wear or "memory" flat spots. 5. Troubleshooting Common Error Codes