Thyssenkrupp Levant Stair Lift Installation Manual ❲2026 Release❳

Copper contact strips mounted at the absolute top and bottom of the rail. 3. Rail Assembly and Mounting Step-by-Step

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Once the rail alignment is perfectly straight, use the mounting feet holes as a guide to drill pilot holes into the stair treads. thyssenkrupp levant stair lift installation manual

Remove any handrails, wall decorations, or light fixtures that protrude into the stair lift's path of travel. Electrical Requirements

A minimum clearance of 24 inches (610 mm) is required at the bottom of the stairs to ensure the user can safely mount and dismount the lift. Copper contact strips mounted at the absolute top

A copper charging strip must be installed along the back of the rail to ensure the unit charges at the top and bottom "parking" points.

If the rail comes in multiple pieces, join them securely on a flat surface, aligning the gear racks perfectly. This link or copies made by others cannot be deleted

To ensure precision alignment of the rail.

The installation requires a nearby standard power socket (typically within a few feet of the top or bottom of the stairs) to supply power for battery charging. 3. Step-by-Step Installation Process (General Guidelines)

Installing a ThyssenKrupp Levant stair lift requires precision, the right tools, and strict adherence to safety protocols. This comprehensive guide provides step-by-step instructions to assemble, mount, and test your straight stair lift system safely. 1. Pre-Installation Preparation